File:Tech - Efergy 3 - Transmitters below box.jpg

From w.mfi
Jump to navigation Jump to search

Original file(4,032 × 3,024 pixels, file size: 2.34 MB, MIME type: image/jpeg)

A closer look at the ten transmitters. Each one has 1 to 3 circuits on it, as described in article. There is only 24" of wire from clamp to transmitter plug, so they have to be close.

They all have USB power wires coming out of what is ordinarily the 3-AA compartment, going to the 10-port USB dude on the left. You can see from this angle, but the port end of each USB cable is wired, and they are in order, A1-A5, B1-B5. There is a simple C clamp holding the USB strip onto the shelf.

The front to the breaker box is on the ground. I have not bothered to put it back on in a long time. Don't play Blind Man's Bluff in my utility closet.

File history

Click on a date/time to view the file as it appeared at that time.

Date/TimeThumbnailDimensionsUserComment
current09:02, 22 July 2017Thumbnail for version as of 09:02, 22 July 20174,032 × 3,024 (2.34 MB)MikeFay (talk | contribs)A closer look at the ten transmitters. Each one has 1 to 3 circuits on it, as described in article. There is only 24" of wire from clamp to transmitter plug, so they have to be close. They all have USB power wires coming out of what is ordinarily the...

The following page uses this file:

Metadata