File:Tech - Efergy 2 - Breaker box.jpg

From w.mfi
Jump to navigation Jump to search

Original file(3,024 × 4,032 pixels, file size: 1.65 MB, MIME type: image/jpeg)

Breaker box. There are 24 breakers (list posted to side). Look how hard it is to get all the Efergy CT clamps in there. I had to be very careful.

Two big white XL CT clamps are on the mains, but the rest are regular (black) Efergy clamps. Everything is labelled with white electrical tape to keeps things straight. There are only two places here to be super scared of never touching: The two junctions of bare metal right beneath the two XL clamps. To the sides are neutral points (only dangerous if your system has a grounding problem). The clothes pins keep the XL clamps from sliding down; I didn't want to get too close to ground zero.

I can't remember why I left two leads sitting there on the lower right... I set this up a year ago. Everything is right that should be, shrug. I guess they're extras I should remove if I want.

The square box on lower left, which is connected to the two big squarish clamps also on the mains, is an Aeon Labs DSB28-ZWUS Home Energy Meter 2E, but that's a whole nother story.

File history

Click on a date/time to view the file as it appeared at that time.

Date/TimeThumbnailDimensionsUserComment
current08:53, 22 July 2017Thumbnail for version as of 08:53, 22 July 20173,024 × 4,032 (1.65 MB)MikeFay (talk | contribs)Breaker box. There are 24 breakers (list posted to side). Look how hard it is to get all the Efergy CT clamps in there. I had to be very careful. Two big white XL CT clamps are on the mains, but the rest are regular (black) Efergy clamps. Everything...

The following page uses this file:

Metadata